Shop - Hotrod Partz

EPS Intake Manifold w/ Oil Fill Tube

Add to cart

Performer EPS Intake Manifold w/ Oil Fill Tube for 1955-86 Small-Block Chevy

$322.95

EPS Intake Manifold w/ Oil Fill Tube

Performer EPS Intake Manifold w/ Oil Fill Tube for 1955-86 Small-Block Chevy

$322.95

More Information
Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347027033
Series	Performer
Grade Type	Performance
Gasket Or Seal Included	No
Vehicle Model	Chevrolet
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Manifold ht: A-3.74″, B-4.80″; Carb pad height: 4.27″; Carb recommendations: Edelbrock AVS2 or Performer Series 500-650 cfm; Port exit dimensions: 1.15″ x 1.87″.; Recommended intake gasket: Edelbrock #7201.; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.; NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal.; DO NOT OVERTIGHTEN NPT/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT/Pipe thread is a tapered thread.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.; Will not fit under stock Corvette hood.; Even though manifolds are compatible with EGR systems, this does not mean they are legal for use on emissions controlled vehicles. Check local laws for legality.; Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.
Color	Satin
Finish	Satin
Material	Aluminum
Rear Maximum Height	4.800 in
Single Or Dual Plane Type	Dual

SKU: EPS/EPS
Availability:
10 in stock
Category: Manifold Intake

or View Full Info

Small-Block Chevy EPS Manifold

Add to cart

Performer EPS Intake Manifold w/Oil Fill Tube; Small-Block Chevy, Black Plasma

$447.95

Chevy Chrome Plasma Intake Manifold

Add to cart

Performer EPS Intake Manifold w/Oil Fill Tube; Small-Block Chevy, Chrome Plasma

$414.95

Chevy Chrome Plasma Intake Manifold

Performer EPS Intake Manifold w/Oil Fill Tube; Small-Block Chevy, Chrome Plasma

$414.95

More Information
Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347897391
Vehicle Model	Chevrolet
Series	Performer
Grade Type	Performance
Gasket Or Seal Included	No
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
EGR Port	No
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Manifold ht: A-3.74″, B-4.80″; Carb pad height: 4.27″; Carb recommendations: Edelbrock AVS2 or Performer Series 500-650 cfm; Port exit dimensions: 1.15″ x 1.87″.; Recommended intake gasket: Edelbrock #7201.; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.; NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal. NPT/Pipe thread is a tapered thread. Edelbrock #8504 intake manifold bolt kit which includes hardened washers to ensure proper torque and prevent galling of the aluminum is highly recommended. Will not fit under stock Corvette hood.
Finish	Chrome Plasma
Material	Aluminum
Rear Maximum Height	4.800 in
Single Or Dual Plane Type	Dual

SKU: Chev/Chev/Chev/1
Availability:
18 in stock
Category: Manifold Intake

or View Full Info

EPS Manifold for Small-Block Chevy

Add to cart

Performer EPS Manifold w/Oil Fill Tube for Small-Block Chevy

$445.95

EPS Manifold for Small-Block Chevy

Performer EPS Manifold w/Oil Fill Tube for Small-Block Chevy

$445.95

More Information
Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347270330
Series	Performer
Grade Type	Performance
Gasket Or Seal Included	No
Vehicle Model	Chevrolet
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Manifold ht: A-3.74″, B-4.80″; Carb pad height: 4.27″; Carb recommendations: Edelbrock AVS2 or Performer Series 500-650 cfm.; Port exit dimensions: 1.15″ x 1.87″.; Recommended intake gasket: Edelbrock #7201.; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.; NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal.; DO NOT OVERTIGHTEN NPT/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT/Pipe thread is a tapered thread.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.; Will not fit under stock Corvette hood.; Even though manifolds are compatible with EGR systems, this does not mean they are legal for use on emissions controlled vehicles. Check local laws for legality.; Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.
Color	Black Powder Coated
Finish	Black Powder Coated
Material	Aluminum
Rear Maximum Height	4.800 in
Single Or Dual Plane Type	Dual

Availability:
22 in stock
Category: Manifold Intake

or View Full Info

Performer EGR Intake Manifold,

Add to cart

Performer Ford 400 EGR Intake Manifold

$526.95

Performer EGR Intake Manifold,

Performer Ford 400 EGR Intake Manifold

$526.95

Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347037711
Series	Performer
Gasket Or Seal Included	No
Vehicle Model	Ford
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Intake gasket: Fel-Pro #MS96020; For non-EGR, off-road applications, use #8714 4V spacer; Replacement EGR plate gaskets: Edelbrock #3896 & #3897; Manifold height: A-3.60″, B-4.75″ (without EGR plates installed); Carb pad height: 4.17″; Carb recommendations: 2V OEM 2-Bbl off highway, Non EGR. 4V: Edelbrock AVS2 or Performer Series 600-650 cfm. For automatic transmissions use #1483 and #1493 or #1844; Port exit dimensions: 1.16″ x 1.66″; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Finish	Satin
Material	Aluminum
Rear Maximum Height	4.750 in
Single Or Dual Plane Type	Dual

SKU: Per/Per/Per/1
Availability:
25 in stock
Category: Manifold Intake

or View Full Info

Intake Manifold for 1955-86

Add to cart

Performer Intake Manifold for 1955-86 Small-Block Chevy, Satin Finish

$257.95

Intake Manifold for 1955-86

Performer Intake Manifold for 1955-86 Small-Block Chevy, Satin Finish

$257.95

More Information
Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347021017
Series	Performer
Grade Type	Performance
Gasket Or Seal Included	No
Vehicle Model	Chevrolet
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Manifold height: A-3.50″, B-4.60″; Carb pad height: 4.05″; Carb recommendations: OEM 4-Bbl, Use choke rod #9171. Edelbrock AVS2 Series or Performer Series Carb 500-650cfm. Bracket #8031 or #8036 for 1972-1978.; Port exit dimensions: 1.14″ x 1.88″; Recommended intake gasket: Edelbrock #7201.; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.; NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal.; DO NOT OVERTIGHTEN NPT/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT/Pipe thread is a tapered thread.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.; Choke plate #8901 included; Even though manifolds are compatible with EGR systems, this does not mean they are legal for use on emissions controlled vehicles. Check local laws for legality.; Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.
Color	Satin
Finish	Satin
Material	Aluminum
Rear Maximum Height	4.600 in
Single Or Dual Plane Type	Dual

SKU: Int/Int/1
Availability:
23 in stock
Category: Manifold Intake

or View Full Info