Shop - Hotrod Partz

Add to cart

Performer 318/360 Intake Manifold for S/B Chrysler, LA Series, Black Finish

$521.95

Performer 318/360 Intake Manifold for S/B Chrysler, LA Series, Black Finish

$521.95

Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347217632
Series	Performer
Grade Type	Performance
Gasket Or Seal Included	No
Vehicle Model	Chrysler
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gasket: Edelbrock #7276, Chrysler #4494462AB for 318, #4397642 for 340 and 360 (or equivalent); Manifold height: A-4.13″, B-5.13″; Carb pad height: 4.63″; Carb recommendations: OEM 4-Bbl, Edelbrock AVS2 or Performer Series 600-650 cfm.; Port exit dimensions: .97″ x 1.95″; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Color	Black Powder Coated
Finish	Black Powder Coated
Material	Aluminum
Rear Maximum Height	5.130 in
Single Or Dual Plane Type	Dual

SKU: Ed/Ed/Ed/Ed/3
Availability:
11 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer 318/360 Intake Manifold for Small-Block Chrysler, LA Series Engines

$397.95

Performer 318/360 Intake Manifold for Small-Block Chrysler, LA Series Engines

$397.95

Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347021765
Series	Performer
Gasket Or Seal Included	No
Vehicle Model	Chrysler
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gasket: Edelbrock #7276, Chrysler #4494462AB for 318, #4397642 for 340 and 360 (or equivalent); Manifold height: A-4.13″, B-5.13″; Carb pad height: 4.63″; Carb recommendations: OEM 4-Bbl, Edelbrock AVS@ or Performer Series 600-650 cfm. Use #1481 #1483 throttle/transmission lever kit.; Port exit dimensions: .97″ x 1.95″; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Finish	Satin
Material	Aluminum
Rear Maximum Height	5.130 in
Single Or Dual Plane Type	Dual

SKU: 318/318
Availability:
16 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer 351 Intake Manifold for Ford 351- 4V Cleveland

$442.95

Performer 351 Intake Manifold for Ford 351- 4V Cleveland

$442.95

Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347026654
Series	Performer
Gasket Or Seal Included	No
Vehicle Model	Ford
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gasket: Fel-Pro #1228; Manifold height: A-3.50″, B-4.30; Carb pad height: 3.90″; Carb recommendations: Edelbrock AVS2 or Performer Series 600-800 cfm, for automatic transmissions use #1483 & #1493 or #1844; Port exit dimensions: #2665 – 1.37″ x 2.15″; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Finish	Satin
Material	Aluminum
Rear Maximum Height	4.300 in
Single Or Dual Plane Type	Dual

SKU: 351/351
Availability:
12 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer 351-W Intake Manifold for S/B Ford 351 Windsor

$382.95

Performer 351-W Intake Manifold for S/B Ford 351 Windsor

$382.95

More Information
Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347021819
Series	Performer
Gasket Or Seal Included	No
Vehicle Model	Ford
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gasket: Edelbrock #7220; Manifold height: A-3.50″, B-4.75″; Carb pad height: 4.12″; Carb recommendations: Edelbrock AVS2 or Performer Series 600-650 cfm; Port exit dimensions: 1.09″ x 1.84″; Choke block-off plate #8981 included; Van installation use OEM Ford van gasket set; will fit early 16-bolt head with Ford 16-bolt intake gasket. Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS. Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Finish	Satin
Material	Aluminum
Rear Maximum Height	4.750 in
Single Or Dual Plane Type	Dua

SKU: 351/351/1
Availability:
15 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer 351-W Intake Manifold for S/B Ford 351 Windsor, Black Finish

$497.95

Performer 351-W Intake Manifold for S/B Ford 351 Windsor, Black Finish

$497.95

More Information
Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347218134
Series	Performer
Grade Type	Performance
Gasket Or Seal Included	No
Vehicle Model	Ford
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gasket: Edelbrock #7220; Manifold height: A-3.50″, B-4.75″; Carb pad height: 4.12″; Carb recommendations: Edelbrock AVS2 or Performer Series 600-650 cfm. For automatic transmissions use #1483 and #1491 or #1844.; Port exit dimensions: 1.09″ x 1.84″; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Color	Black Powder Coated
Finish	Black Powder Coated
Material	Aluminum
Rear Maximum Height	4.750 in
Single Or Dual Plane Type	Dua

SKU: Int/Int/Int
Availability:
75 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer 383 Intake Manifold for 1958-1979 Chrysler, B Series Engines

$391.95

Performer 383 Intake Manifold for 1958-1979 Chrysler, B Series Engines

$391.95

More Information
Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347021864
Series	Performer
Gasket Or Seal Included	No
Vehicle Model	Chrysler
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gasket: Edelbrock #7225; Manifold height: A-3.65″, B-4.35″, measured to engine block; Carb pad height: 4.00″; Carb recommendations: OEM 4-Bbl, Edelbrock Thunder AVS or Performer Series 600-800cfm.Use #1481 or #1483 throttle/transmission lever kit.; Port exit dimensions: 1.14″ x 2.12″; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Finish	Satin
Material	Aluminum
Rear Maximum Height	4.350 in
Single Or Dual Plane Type	Dual

SKU: Per/Per/Per/4
Availability:
9 in stock
Category: Manifold Intake

or View Full Info