Shop - Hotrod Partz

Add to cart

Performer 5.8L Base Intake Manifold Small-Block Ford

$522.95

Performer 5.8L Base Intake Manifold Small-Block Ford

$522.95

More Information
Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347038848
Series	Performer
Gasket Or Seal Included	No
Vehicle Model	Ford
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code	N/A
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gasket: Edelbrock #7220; Base only, for 1986-93 Mustang 351 W engine swaps with Edelbrock #3822 or #7125 upper; Base has provision for rear PCV
Finish	Satin
Material	Aluminum
Rear Maximum Height	0.010 in
Single Or Dual Plane Type	Dual

Availability:
32 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer EGR AMC Intake Manifold

$484.95

Performer EGR AMC Intake Manifold

$484.95

Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347037315
Series	Performer
Gasket Or Seal Included	No
Vehicle Model	AMC
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gasket: Fel-Pro MS96011; Must use factory style metal valley tray; Manifold have two center bolt holes offset; Manifold height: A-4.20″, B-5.50″; Carb pad height: 4.85″; Carb recommendations: Requires Edelbrock #8008 or #8024 stud, nut and washer kit. OEM 4-Bbl non-EGR square-bore. Edelbrock AVS2 or Performer Series 500-650 cfm.; Port exit dimensions: 1.03″ x 2.07″; Edelbrock bracket #8034 required for 1979 and later vehicles; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Finish	Satin
Material	Aluminum
Rear Maximum Height	5.500 in
Single Or Dual Plane Type	Dual

DOWNLOADS

SKU: Per/Per/Per/3
Availability:
33 in stock
Category: Manifold Intake

or View Full Info

EPS Intake Manifold for Small-Block Chevy

Add to cart

Performer EPS Intake Manifold for 1955-86 Small-Block Chevy

$504.95

Performer EPS Intake Manifold for 1955-86 Small-Block Chevy

$504.95

More Information
Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347270118
Series	Performer
Grade Type	Performance
Gasket Or Seal Included	No
Vehicle Model	Chevrolet
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Manifold ht: A-3.74″, B-4.80″; Carb pad height: 4.27″; Carb recommendations: Edelbrock AVS2 or Performer Series 500-650 cfm.; Port exit dimensions: 1.15″ x 1.87″.; Recommended intake gasket: Edelbrock #7201.; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.; NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal.; DO NOT OVERTIGHTEN NPT/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT/Pipe thread is a tapered thread.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.; Will not fit under stock Corvette hood.; Even though manifolds are compatible with EGR systems, this does not mean they are legal for use on emissions controlled vehicles. Check local laws for legality.; Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.
Color	Polished
Finish	Polished
Material	Aluminum
Rear Maximum Height	4.800 in
Single Or Dual Plane Type	Dual

SKU: EPS/EPS/EPS
Availability:
55 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer EPS Intake Manifold for 1955-86 Small-Block Chevy

$195.95

Performer EPS Intake Manifold for 1955-86 Small-Block Chevy

$195.95

Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347027019
Series	Performer
Grade Type	Performance
Gasket Or Seal Included	No
Vehicle Model	Chevrolet
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Manifold ht: A-3.74″, B-4.80″; Carb pad height: 4.27″; Carb recommendations: Edelbrock AVS2 or Performer Series 500-650 cfm; Port exit dimensions: 1.15″ x 1.87″.; Recommended intake gasket: Edelbrock #7201.; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.; NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal.; DO NOT OVERTIGHTEN NPT/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT/Pipe thread is a tapered thread.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.; Will not fit under stock Corvette hood.; Even though manifolds are compatible with EGR systems, this does not mean they are legal for use on emissions controlled vehicles. Check local laws for legality.; Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.
Color	Satin
Finish	Satin
Material	Aluminum
Rear Maximum Height	4.800 in
Single Or Dual Plane Type	Dual

SKU: EPS/EPS/1
Availability:
23 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer EPS Intake Manifold for 1955-86 Small-Block Chevy, Black Finish

$360.95

Performer EPS Intake Manifold for 1955-86 Small-Block Chevy, Black Finish

$360.95

Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347270132
Series	Performer
Grade Type	Performance
Gasket Or Seal Included	No
Vehicle Model	Chevrolet
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Manifold ht: A-3.74″, B-4.80″; Carb pad height: 4.27″; Carb recommendations: Edelbrock AVS2 or Performer Series 500-650 cfm.; Port exit dimensions: 1.15″ x 1.87″.; Recommended intake gasket: Edelbrock #7201.; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.; NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal.; DO NOT OVERTIGHTEN NPT/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT/Pipe thread is a tapered thread.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.; Will not fit under stock Corvette hood.; Even though manifolds are compatible with EGR systems, this does not mean they are legal for use on emissions controlled vehicles. Check local laws for legality.; Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.
Color	Black Powder Coated
Finish	Black Powder Coated
Material	Aluminum
Rear Maximum Height	4.800 in
Single Or Dual Plane Type	Dual

SKU: Int/Int/Int/1
Availability:
100 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer EPS Intake Manifold for 1955-86 Small-Block Chevy, Black Plasma Finish

$466.95

Performer EPS Intake Manifold for 1955-86 Small-Block Chevy, Black Plasma Finish

$466.95

Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347270125
Vehicle Model	Chevrolet
Series	Performer
Grade Type	Performance
Gasket Or Seal Included	No
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
EGR Port	No
Emissions Code
Features and Benefits	• Outstanding performance for street rods, muscle cars and classics. • Low profile with provisions for stock accessory brackets. • 7 stage prewash and 4 stage coating for a beautiful and durable finish. • Easy to maintain, just wipe and go!
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Manifold ht: A-3.74″, B-4.80″; Carb pad height: 4.27″; Carb recommendations: Edelbrock AVS2 or Performer Series 500-650 cfm; Port exit dimensions: 1.15″ x 1.87″.; Recommended intake gasket: Edelbrock #7201.; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.; NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal.; DO NOT OVERTIGHTEN NPT/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT/Pipe thread is a tapered thread.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.; Will not fit under stock Corvette hood.; Even though manifolds are compatible with EGR systems, this does not mean they are legal for use on emissions controlled vehicles. Check local laws for legality.; Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.
Finish	Black Plasma
Material	Aluminum
Rear Maximum Height	4.800 in
Single Or Dual Plane Type	Dual

SKU: EPSI/EPSI
Availability:
44 in stock
Category: Manifold Intake
Tags: 1955-86 Chevy Performer EPS Intake Manifold Upgrade, Best Black Plasma Performer Intake for Classic Chevy, Black Plasma EPS Intake Manifold for Small-Block Chevy, EPS Manifold for Chevy 262-400 CID Black Plasma, Small-Block Chevy Performance Intake with Black Finish

or View Full Info