Performer T.B.I. Intake Manifold Small-Block Chevy

More Information

Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347037049
Series	Performer
Gasket Or Seal Included	No
Vehicle Model	Chevrolet
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Use stock Throttle Body Injection unit.; Recommended intake gasket: GM #10159409.; Manifold height: A-3.70″, B-5.10″; TBI pad height: 4.40″, .250″ taller than stock.; Port exit dimensions: 1.13″ x 1.87″.; Made in the USA; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.; Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.; Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.; NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal.; DO NOT OVERTIGHTEN NPT/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT/Pipe thread is a tapered thread.; Even though manifolds are compatible with EGR systems, this does not mean they are legal for use on emissions controlled vehicles. Check local laws for legality.; Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.
Finish	Satin
Material	Aluminum
Rear Maximum Height	5.100 in
Single Or Dual Plane Type	Dual

PerTronix D131701 Flame-Thrower Ford 351W Billet Distributor

Key Specs

Phoenix Race Tires PH55R Radial Slick, 13.6/32.0-15

Key Specs

Pierce Arrow Dash Panel

FEATURES:

There is a lot of history behind these dash panels and certainly not very many out there. This reproduction Pierce Arrow dash insert is sure to impress at the shows and just be something a little different from what we see in every other 32. Made with the correct shape to fit the curvature of the 32 dash and just big enough to fit all the necessary gauges into. Do some research on this piece to get an idea of different gauge layout possibilities. High quality casting made in Australia!

WHAT’S INCLUDED:

Polished Buick Front Brake Drum Kit 12×2, 45-fin, Plates & Hubs

• No machining required for installation, unlike original Buick finned drums
• Iconic 45-fin “Buick” brake drum styling of the past
• New aluminum castings with integrated steel brake shoe liner
• Vibratory polished finish compliments chrome or painted suspensions
• Lighter weight than a traditional steel cast drum brake
• CNC machined to clear 1937-1948 Ford brake 12”x2” drum brakes
• Computer balanced for a smooth ride, no ugly stick on weights
• Hub centric 5 x 5.5″ wheel bolt pattern fits many popular wheel styles
• Uniformly smooth cast surface is ideal for surface polishing if desired
• Includes 1937-1948 Ford 12″x2″ Bendix brake kit and early Ford hubs
• Bearings, bearing races, and wheel seals included to complete installation on your spindles
• Kelsey Hayes or Ford wire wheels are not recommended due to the same issues as original Buick drums

Powermaster 9103 PowerMax Starter, Small Block Ford, 157 Tooth

This lightweight high-torque gear reduction starter clears all headers and oil pans where original equipment starters won’t. The PowerMax starter is a great choice for the everyday driver that has stock compression and timing.

Starter works with most oversized kickout oil pans. Features 160 ft. lbs. of torque and a 6.1:1 gear reduction ratio. Fits Small Block Ford applications w/ 157T manual transmissions and 157/164T automatic transmission .

• 157 Tooth Flywheel & 157/164 Tooth Flexplate Application
• 4.08″ Starter Registry Hole
• Adjustable mounting block
• Works with most Oversized Kickout Oil Pans
• 6.1:1 Gear Reduction Ratio
• 160 ft. lbs. of torque.
• Recommended for 10:1 compression ratio
• Weighs 7.44 pounds
• Mounting Bolts Included
• Dyno Test Results included

Powermaster 9162 Small Block Ford Ultra Mini Starter, 1.4 kW, A/

221, 255, 260, 289, 302, 351C, 351W, 5.0L

• Features a billet aluminum adapter block
• Will fit Small Block Ford engines
• Engineered to put out up to 200 ft. lbs. of torque
• Has a 4.4:1 gear reduction ratio and will work on engines with up to a 18:1 compression ratio
• This lightweight high-torque gear reduction starter clears all headers and oil pans where original equipment starters won’t

Pro-Trac Front Runner | 215/75-15

Specs

Pushrod Set for Chevy 348/409 “W”

Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347096350
Quantity	Set of 16
Top Tip Diameter	0.375 in
Top Tip Type	Ball
Bottom Tip Diameter	0.375 in
Bottom Tip Type	Ball
Availability Note	Available to Order
Warranty	12 Months
Wall Thickness	0.080 in
Emissions Code	N/A
Hazardous Materials Warning	WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	For Chevy 348/409 “W”; Sold in sets of 16.
Finish	Black Oxide
Length	(8-Intake) 8.650 in, (8-Exhaust) 9.000 in
Material	Chromoly

All items to be returned, whether flawed or incorrect merchandise can be returned within 30 days of original ship date. ALL returns may be subject to a 15% restocking fee.

Quarts Halogen Headlights; 1932 Car, Pickup

All items to be returned, whether flawed or incorrect merchandise can be returned within 30 days of original ship date. ALL returns may be subject to a 15% restocking fee.

TO RETURN AN ITEM

Call customer service  Monday through Friday. They will issue you a Return Material Authorization Number (RMA#). Display this RMA# visibly on the outside of the return packaging. Enclose a copy of the original invoice with the returned merchandise.

All returns must be pre-paid shipping and fully insured. We do not accept collect shipments or unauthoized returns. When the return is due to our error, we will refund the pre-paid freight charges and immediately exchange the item(s) or provide a refund.

All items to be returned, whether flawed or incorrect merchandise can be returned within 30 days of original ship date. ALL returns may be subject to a 15% restocking fee

Quartz Halogen Headlights; 1933-34 Car

All items to be returned, whether flawed or incorrect merchandise can be returned within 30 days of original ship date. ALL returns may be subject to a 15% restocking fee

Quartz Halogen Headlights; 1933-34 Pickup, Commercial, 1933-34 Car

All items to be returned, whether flawed or incorrect merchandise can be returned within 30 days of original ship date. ALL returns may be subject to a 15% restocking fee.

Quick Fuel 30-302QFT Mechanical Fuel Pump, 110 GPH, Ford 289-351W

REAR BRAKE CALIPER – 4 PISTON – SOFTAIL ’87-’99 – CHROME

Rear Brake Caliper – 4 Piston – Softail ’87-’99 – Chrome

• Direct bolt-on design
• Calipers include brake pads and bleeder screws
• Not for Springer (front) or Deuce (rear).
• chrome finish