Manifold Intake - Hotrod Partz

Edelbrock Performer Pontiac Intake Manifold

Add to cart

Performer Intake Manifold for 1965-79 Pontiac 326-455 Non-EGR, Polished Finish

$618.95

Performer Intake Manifold for 1965-79 Pontiac 326-455 Non-EGR, Polished Finish

$618.95

Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347215614
Series	Performer
Grade Type	Performance
Gasket Or Seal Included	No
Vehicle Model	Pontiac
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gasket: Edelbrock #7280.; For 1968-71 use Edelbrock #8015 throttle bracket.; Manifold height: A-5.50″, B-6.60″ measured to engine block same as stock 4-bbl. intake; Carb pad height: 6.05″; Carb recommendations: OEM 4-Bbl, Edelbrock AVS2 or Performer Series 600-800 cfm.; Port exit dimensions: 1.06″ x 1.92″; For Trans Am use OEM 4-bbl. carb for Shaker Hood clearance.; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Color	Polished
Finish	Polished
Material	Aluminum
Rear Maximum Height	6.600 in
Single Or Dual Plane Type	Dual

SKU: Ed/Ed/Ed/2
Availability:
20 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer Intake Manifold for 1968-1976 Cadillac 472-500, Satin Finish

$426.95

Performer Intake Manifold for 1968-1976 Cadillac 472-500, Satin Finish

$426.95

Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347021154
Series	Performer
Gasket Or Seal Included	No
Vehicle Model	Cadillac
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gasket: Fel-Pro #MS96028; When using Quadrajet, #2115 accepts divorced or electric choke only.; Manifold height: A-4.88″, B-5.81″; Carb pad height: 5.34″; Carb recommendations: OEM 4-Bbl, Edelbrock AVS2 Series or Performer Series 750-800cfm; Port exit dimensions: 1.25″ x 2.00″; The carb pad is 3″ taller than stock, and will not fit many stock applications.; Due to the design and leg configuration of the Edelbrock manifold, the stock air conditioning compressor and bracket will not fit. The mounting bosses are cast into the manifold only to facilitate fabrication of bracketry, if desired.; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Finish	Satin
Material	Aluminum
Rear Maximum Height	5.810 in
Single Or Dual Plane Type	Dual

SKU: Int/Int/Int/4
Availability:
22 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer Intake Manifold for 1970-91 AMC, Non-EGR, Satin Finish

$424.95

Performer Intake Manifold for 1970-91 AMC, Non-EGR, Satin Finish

$424.95

More Information
Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347021314
Series	Performer
Gasket Or Seal Included	No
Vehicle Model	AMC/Jeep
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gasket: Edelbrock #7213 Fel-Pro MS96011; Must use factory style metal valley tray; Manifold height: A-4.20″, B-5.50″; Carb pad height: 4.85″; Requires #8008 or #8024 Stud, nut and washer kit.; Car recommendations: OEM 4-Bbl . Non-EGR square-bore Edelbrock AVS2 or Performer Series 500-650cfm.; Port exit dimensions: 1.03″ x 2.07″; #2131 must use factory style metal valley tray.; Manifolds have two center bolt holes offset.; Edelbrock bracket #8034 required for 1979 and later vehicles.; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.; Manifold will not accept factory Motorcraft spread-bore carburetors.
Finish	Satin
Material	Aluminum
Rear Maximum Height	5.500 in
Single Or Dual Plane Type	Dual

SKU: Int/Int
Availability:
18 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer Intake Manifold for 1985-95 GM 90 Deg V6 (3.8L & 4.3L)

$358.95

Performer Intake Manifold for 1985-95 GM 90 Deg V6 (3.8L & 4.3L)

$358.95

More Information
Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347021116
Series	Performer
Gasket Or Seal Included	No
Vehicle Model	Chevrolet
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gasket: Edelbrock #7209 or Fel-Pro #1202; Manifold height: A-3.50″, B-4.18″; Carb pad height: 3.84″; Carb recommendations: Edelbrock AVS2 Series or Performer Series 500cfm; Port exit dimensions: 1.15″ x 1.87″; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Finish	Satin
Material	Aluminum
Rear Maximum Height	4.180 in
Single Or Dual Plane Type	Dual

SKU: 198/198
Availability:
18 in stock
Category: Manifold Intake

or View Full Info

Performer Intake Manifold in Satin Finish

Add to cart

Performer Intake Manifold for 1987-95 Small Block Chevy, Satin Finish

$329.95

Performer Intake Manifold for 1987-95 Small Block Chevy, Satin Finish

$329.95

Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347021048
Series	Performer
Grade Type	Performance
Gasket Or Seal Included	No
Vehicle Model	Chevrolet
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Manifold ht: A-3.50″, B-4.60″; Carb pad height: 4.05″; Carb recommendations: OEM 4-Bbl, Use choke rod #9171. Edelbrock AVS2 Series or Performer Series Carb 500-650cfm. Bracket #8031 or #8036 for 1972-1978.; Port exit dimensions: 1.14″ x 1.88″; Recommended intake gasket: GM #10159409; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.; NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal.; DO NOT OVERTIGHTEN NPT/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT/Pipe thread is a tapered thread.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.; Choke plate #8901 included; Even though manifolds are compatible with EGR systems, this does not mean they are legal for use on emissions controlled vehicles. Check local laws for legality.; Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.
Color	Satin
Finish	Satin
Material	Aluminum
Rear Maximum Height	4.600 in
Single Or Dual Plane Type	Dual

SKU: Per/Per/6
Availability:
19 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer Intake Manifold for Buick 400-455 V8, Non-EGR, Satin Finish

$440.95

Performer Intake Manifold for Buick 400-455 V8, Non-EGR, Satin Finish

$440.95

More Information
Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347021468
Series	Performer
Gasket Or Seal Included	No
Vehicle Model	Buick
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gaskets: for 1967-71, Fel-Pro #MS96005; 1972-76, Fel-Pro #MS96014; Manifold height: A-3.80″, B-4.75″; Carb pad height: 4.27″; Carb recommendations: OEM 4-Bbl, Edelbrock AVS2 or Performer Series 650-800cfm; Port exit dimensions: 1.14″ x 2.26″; #2146 accepts divorced choke-type Quadrajet only.; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Finish	Satin
Material	Aluminum
Rear Maximum Height	4.750 in
Single Or Dual Plane Type	Dual

SKU: TBI/TBI
Availability:
16 in stock
Category: Manifold Intake

or View Full Info