Manifold Intake - Hotrod Partz

Add to cart

Performer Olds 350 Intake Manifold for 307-330-350-403 Small-Block Oldsmobile

$473.95

Performer Olds 350 Intake Manifold for 307-330-350-403 Small-Block Oldsmobile

$473.95

Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347027118
Series	Performer
Grade Type	Performance
Gasket Or Seal Included	No
Vehicle Model	Oldsmobile
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gasket: Fel-Pro #MS96027; For 403 Pontiac Trans Am, use OEM 4-bbl. only (for shaker hood clearance); HEI will clear this manifold; Manifold height: A-2.50″, B-3.90″; Carb pad height: 3.20″; Carb recommendations: Edelbrock AVS2 or Performer Series 500-650 cfm; Port exit dimensions: 1.18″ x 1.86″; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Color	Satin
Finish	Satin
Material	Aluminum
Rear Maximum Height	4.800 in
Single Or Dual Plane Type	Dual

Availability: N/A
Category: Manifold Intake

or View Full Info

Add to cart

Performer Small-Block Chevy 2.8L Intake Manifold

$360.95

Performer Small-Block Chevy 2.8L Intake Manifold

$360.95

More Information
Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347037858
Series	Performer
Gasket Or Seal Included	No
Vehicle Model	Chevrolet
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-6000 RPM
Emissions Code	N/A
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gasket: Fel-Pro #1270 or #MS91022.; Linkage and bracketry come with top.; Jeep Cherokee, additional hood shimming is required for clearance (when used with #3787 Top) Hood shims available from Jeep dealers (part #J0680435); Port exit dimensions: 1.00″ x 1.28″/1.00″ x 1.71″.; Manifold height: A-4.90″, B-5.95″; Carb pad height: 5.42″ (when used with #3789 Top); Manifold height: A-4.37″, B-5.45″; Carb pad height: 4.91″ (when used with #3787 Top); Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Finish	Satin
Material	Aluminum
Rear Maximum Height	0.010 in
Single Or Dual Plane Type	Dual

SKU: Sma/Sma/Sma
Availability:
23 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer Small-Block Chevy 4.3L T.B.I. V6 Intake Manifold

$566.95

Performer Small-Block Chevy 4.3L T.B.I. V6 Intake Manifold

$566.95

More Information
Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347037131
Series	Performer
Gasket Or Seal Included	No
Vehicle Model	Chevrolet
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Use stock Throttle Body Injection unit.; Recommended intake gasket: GM #12510908; Manifold height: A-3.93″, B-5.15″; Carb pad height: 4.54″; Port exit dimensions: 1.10″ x 1.92″; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Finish	Satin
Material	Aluminum
Rear Maximum Height	5.150 in
Single Or Dual Plane Type	Dual

SKU: Sma/Sma
Availability:
25 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer Small-Block Oldsmobile 350 EGR Intake Manifold

$463.95

Performer Small-Block Oldsmobile 350 EGR Intake Manifold

$463.95

Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347037117
Series	Performer
Gasket Or Seal Included	No
Vehicle Model	Oldsmobile
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Carb recommendations: OEM 4-Bbl; Edelbrock Performer Series, Thunder Series AVS, AVS2 and Carter AFB carburetors will not fit #3711.; Recommended intake gasket: Fel-Pro #MS96027; For 403 Pontiac Trans Am, use OEM 4-bbl. only (for shaker hood clearance); EGR block-off plate included; Use choke block-off plate #8951 (included); Factory cruise control will not clear EGR valve without linkage alteration.; HEI will clear this manifold; Manifold height: A-2.50″, B-3.90″; Carb pad height: 3.20″; Port exit dimensions: 1.18″ x 1.86″; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Finish	Satin
Material	Aluminum
Rear Maximum Height	3.900 in
Single Or Dual Plane Type	Dual

SKU: Sma/Sma/1
Availability:
13 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer T.B.I. Intake Manifold Small-Block Chevy

$494.95

Performer T.B.I. Intake Manifold Small-Block Chevy

$494.95

Performer T.B.I. Intake Manifold Small-Block Chevy

More Information
Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347037049
Series	Performer
Gasket Or Seal Included	No
Vehicle Model	Chevrolet
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Use stock Throttle Body Injection unit.; Recommended intake gasket: GM #10159409.; Manifold height: A-3.70″, B-5.10″; TBI pad height: 4.40″, .250″ taller than stock.; Port exit dimensions: 1.13″ x 1.87″.; Made in the USA; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.; Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.; Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.; NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal.; DO NOT OVERTIGHTEN NPT/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT/Pipe thread is a tapered thread.; Even though manifolds are compatible with EGR systems, this does not mean they are legal for use on emissions controlled vehicles. Check local laws for legality.; Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.
Finish	Satin
Material	Aluminum
Rear Maximum Height	5.100 in
Single Or Dual Plane Type	Dual

SKU: Per/Per/7
Availability:
32 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer Top Small-Block Chevy 4V Intake Manifold

$205.95

Performer Top Small-Block Chevy 4V Intake Manifold

$205.95

More Information
Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347037896
Series	Performer
Grade Type	Performance
Gasket Or Seal Included	No
Vehicle Model	Chevrolet
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-6000 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gasket: Fel-Pro #1270 or #MS91022.; Carb recommendations: Holley #0-8007 (390 cfm); Linkage and bracketry come with top.; Port exit dimensions: 1.00″ x 1.28″/1.00″ x 1.71″.; Manifold height: A-4.90″, B-5.95″; Carb pad height: 5.42″; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Color	Satin
Finish	Satin
Material	Aluminum
Rear Maximum Height	0.010 in
Single Or Dual Plane Type	Dual

SKU: Top/Top/Top
Availability:
19 in stock
Category: Manifold Intake

or View Full Info