Manifold Intake - Hotrod Partz

Add to cart

Performer 400 Intake Manifold for 1971-82 Ford 351/M400

$421.95

Performer 400 Intake Manifold for 1971-82 Ford 351/M400

$421.95

More Information
Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347021710
Series	Performer
Gasket Or Seal Included	No
Vehicle Model	Ford
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Edelbrock carburetor flange plate #2732 is included; Recommended intake gasket: Fel-Pro #MS96020; Manifold height: A-3.60″, B-4.75″; Carb pad height: 4.17″; Carb recommendations: Edelbrock AVS2 or Performer Series 600-650 cfm, for automatic transmissions use #1483 and #1493 or #1844; Port exit dimensions: 1.24″ x 1.70″; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Finish	Satin
Material	Aluminum
Rear Maximum Height	4.750 in
Single Or Dual Plane Type	Dual

SKU: Per/Per/2
Availability:
20 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer 440 Intake Manifold for Chrysler, RB Series 413-440 Engines

$360.95

Performer 440 Intake Manifold for Chrysler, RB Series 413-440 Engines

$360.95

More Information
Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347021918
Series	Performer
Gasket Or Seal Included	No
Vehicle Model	Chrysler
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gasket: #7225; Manifold height: A-3.80″, B-4.80″, measured to engine block; Carb pad height: 4.30″; Carb recommendations: OEM 4-Bbl, Edelbrock AVS2 or Performer Series 650-800 cfm. Use #1481 or #1483 throttle/transmission lever kit.; Port exit dimensions: 1.12″ x 2.14″; May require different EGR valve, see installation instructions; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Finish	Satin
Material	Aluminum
Rear Maximum Height	4.800 in
Single Or Dual Plane Type	Dual

SKU: Per/Per/1
Availability:
22 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer 454 T.B.I. Intake Manifold Big-Block Chevy

$535.95

Performer 454 T.B.I. Intake Manifold Big-Block Chevy

$535.95

Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347037643
Series	Performer
Gasket Or Seal Included	No
Vehicle Model	Chevrolet
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Use stock Throttle Body Injection unit; Recommended intake gasket: GM #10181398.; Manifold height: A-4.30″, B-6.45″ same as stock; Carb pad height: 5.37″; Port exit dimensions: 1.41″w x 1.59″t; 1987-90 Chevy 454 trucks require Edelbrock GM T.B.I. throttle bracket #8019; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Finish	Satin
Material	Aluminum
Rear Maximum Height	6.450 in
Single Or Dual Plane Type	Dual

SKU: Per/Per/Per/2
Availability:
13 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer 460 Intake Manifold #2166 for Ford 429/460, Non-EGR, Satin Finish

$397.95

Performer 460 Intake Manifold #2166 for Ford 429/460, Non-EGR, Satin Finish

$397.95

More Information
Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347021666
Series	Performer
Gasket Or Seal Included	No
Vehicle Model	Ford
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gasket: Edelbrock #7223 or Fel-Pro #MS96018; Manifold height: A-3.75″, B-4.49″ same as stock; Carb pad height: 4.12″; Carb recommendations: Edelbrock AVS2 or Performer Series 650-800 cfm, for automatic transmissions use #1483 and #1495 or #1844; Port exit dimensions: 1.65″ x 1.96″; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Finish	Satin
Material	Aluminum
Rear Maximum Height	4.490 in
Single Or Dual Plane Type	Dual

SKU: Per/Per/4
Availability:
6 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer 5.8L Base Intake Manifold Small-Block Ford

$522.95

Performer 5.8L Base Intake Manifold Small-Block Ford

$522.95

More Information
Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347038848
Series	Performer
Gasket Or Seal Included	No
Vehicle Model	Ford
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code	N/A
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gasket: Edelbrock #7220; Base only, for 1986-93 Mustang 351 W engine swaps with Edelbrock #3822 or #7125 upper; Base has provision for rear PCV
Finish	Satin
Material	Aluminum
Rear Maximum Height	0.010 in
Single Or Dual Plane Type	Dual

Availability:
32 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer EGR AMC Intake Manifold

$484.95

Performer EGR AMC Intake Manifold

$484.95

Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347037315
Series	Performer
Gasket Or Seal Included	No
Vehicle Model	AMC
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gasket: Fel-Pro MS96011; Must use factory style metal valley tray; Manifold have two center bolt holes offset; Manifold height: A-4.20″, B-5.50″; Carb pad height: 4.85″; Carb recommendations: Requires Edelbrock #8008 or #8024 stud, nut and washer kit. OEM 4-Bbl non-EGR square-bore. Edelbrock AVS2 or Performer Series 500-650 cfm.; Port exit dimensions: 1.03″ x 2.07″; Edelbrock bracket #8034 required for 1979 and later vehicles; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Finish	Satin
Material	Aluminum
Rear Maximum Height	5.500 in
Single Or Dual Plane Type	Dual

DOWNLOADS

SKU: Per/Per/Per/3
Availability:
33 in stock
Category: Manifold Intake

or View Full Info