Valve Covers - Hotrod Partz

LS Series Coil Covers in Black Finish (3-3/8" Overall Height)

Add to cart

LS Series Coil Covers in Black Finish (3-3/8″ Overall Height)

$404.95

LS Series Coil Covers in Black Finish (3-3/8" Overall Height)

LS Series Coil Covers in Black Finish (3-3/8″ Overall Height)

$404.95

Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347411832
Series	LS Series
Attachment Type	Stretch
Availability Note	Available to Order
Warranty	12 Months
Emissions Code	N/A
Hazardous Materials Warning	WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Note: These covers are intended for custom hot rod applications. As such, they may not clear all the hoses, emission hardware,; and/or accessories found in a stock application. Modification of the covers may be necessary for use in such an application.; 1.Disconnect and remove the spark plug wires and set them aside for reinstallation later, then detach the wiring harness connector.; Unbolt and remove the bracket with the coils attached. At this time, test fit the coil covers on the engine to ensure they will fit; your application without interference.; 2. Once the fit has been verified, separate the wiring loom enough to disconnect the small clips securing it to the bracket, then; remove the individual coils from the bracket. The stock coil mounting bracket can be set aside or discarded as it will not be; reused. Mount the ignition coils to the underside of the covers using the stock bolts, carefully routing the wires so as to prevent them from being pinched or damaged.; 3. Attach the supplied reusable tie wrap to the center provision on the underside of the coil cover using the supplied #6 cap screw.; Use the tie wrap to secure the wiring harness connector to the cover, then install the spark plug wires onto the ignition coils.; The coil cover can then be secured by threading the supplied bolts into the mounting holes of the valve cover. Use a dummy; bolt secured with a nut to fill any mounting holes in the coil cover that do not correspond with a threaded boss in the valve cover.; 4. Attach the ignition wires to the spark plugs and your installation is complete. Installation is the same for both sides of the engine,; but be aware that the engine oil dipstick tube may need to be bent outward slightly to clear the passenger side cover.
Color	Black
Finish	Black Powder Coated
Material	Aluminum
Universal Or Specific Fit	Specific

SKU: Covers LSS/LSS
Availability:
10 in stock
Category: Valve Covers

or View Full Info

LS Series Coil Covers in Polished Finish (3-3/8" Overall Height)

Add to cart

LS Series Coil Covers in Polished Finish (3-3/8″ Overall Height)

$468.95

LS Series Coil Covers in Polished Finish (3-3/8" Overall Height)

LS Series Coil Covers in Polished Finish (3-3/8″ Overall Height)

$468.95

Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347411818
Series	LS Series
Attachment Type	Stretch
Availability Note	Available to Order
Warranty	12 Months
Emissions Code	N/A
Hazardous Materials Warning	WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Note: These covers are intended for custom hot rod applications. As such, they may not clear all the hoses, emission hardware,; and/or accessories found in a stock application. Modification of the covers may be necessary for use in such an application.; 1.Disconnect and remove the spark plug wires and set them aside for reinstallation later, then detach the wiring harness connector.; Unbolt and remove the bracket with the coils attached. At this time, test fit the coil covers on the engine to ensure they will fit; your application without interference.; 2. Once the fit has been verified, separate the wiring loom enough to disconnect the small clips securing it to the bracket, then; remove the individual coils from the bracket. The stock coil mounting bracket can be set aside or discarded as it will not be; reused. Mount the ignition coils to the underside of the covers using the stock bolts, carefully routing the wires so as to prevent them from being pinched or damaged.; 3. Attach the supplied reusable tie wrap to the center provision on the underside of the coil cover using the supplied #6 cap screw.; Use the tie wrap to secure the wiring harness connector to the cover, then install the spark plug wires onto the ignition coils.; The coil cover can then be secured by threading the supplied bolts into the mounting holes of the valve cover. Use a dummy; bolt secured with a nut to fill any mounting holes in the coil cover that do not correspond with a threaded boss in the valve cover.; 4. Attach the ignition wires to the spark plugs and your installation is complete. Installation is the same for both sides of the engine,; but be aware that the engine oil dipstick tube may need to be bent outward slightly to clear the passenger side cover.
Color	Polished
Material	Aluminum
Universal Or Specific Fit	Specific

SKU: Covers
Availability:
20 in stock
Category: Valve Covers

or View Full Info

Edelbrock Supercharger Chevy Camaro SS

Add to cart

LS Series Coil Covers in Satin Finish (3-3/8″ Overall Height)

$336.95

Edelbrock Supercharger Chevy Camaro SS

LS Series Coil Covers in Satin Finish (3-3/8″ Overall Height)

$336.95

Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347041183
Series	LS Series
Attachment Type	Stretch
Availability Note	Available to Order
Warranty	12 Months
Emissions Code	N/A
Hazardous Materials Warning	WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Note: These covers are intended for custom hot rod applications. As such, they may not clear all the hoses, emission hardware,; and/or accessories found in a stock application. Modification of the covers may be necessary for use in such an application.; 1.Disconnect and remove the spark plug wires and set them aside for reinstallation later, then detach the wiring harness connector.; Unbolt and remove the bracket with the coils attached. At this time, test fit the coil covers on the engine to ensure they will fit; your application without interference.; 2. Once the fit has been verified, separate the wiring loom enough to disconnect the small clips securing it to the bracket, then; remove the individual coils from the bracket. The stock coil mounting bracket can be set aside or discarded as it will not be; reused. Mount the ignition coils to the underside of the covers using the stock bolts, carefully routing the wires so as to prevent them from being pinched or damaged.; 3. Attach the supplied reusable tie wrap to the center provision on the underside of the coil cover using the supplied #6 cap screw.; Use the tie wrap to secure the wiring harness connector to the cover, then install the spark plug wires onto the ignition coils.; The coil cover can then be secured by threading the supplied bolts into the mounting holes of the valve cover. Use a dummy; bolt secured with a nut to fill any mounting holes in the coil cover that do not correspond with a threaded boss in the valve cover.; 4. Attach the ignition wires to the spark plugs and your installation is complete. Installation is the same for both sides of the engine,; but be aware that the engine oil dipstick tube may need to be bent outward slightly to clear the passenger side cover.
Color	Satin
Material	Aluminum
Universal Or Specific Fit	Specific

SKU: LS/LS/LS/LS
Availability:
23 in stock
Category: Valve Covers

or View Full Info

Offenhauser 1090 1932-1948 Ford Flathead Regular Dual Intake Manifold

Add to cart

Offenhauser 1090 1932-1948 Ford Flathead Regular Dual Intake Manifold

$565.99

Offenhauser 2727 1954-1957 Ford Y-Block Valve Covers

Add to cart

Offenhauser 2727 1954-1957 Ford Y-Block Valve Covers

$512.99

Offenhauser 3200 49-53 Olds Rocket Dual Quad Intake, Small Port

Add to cart

Offenhauser 3200 49-53 Olds Rocket Dual Quad Intake, Small Port

$707.64