Manifold Intake

Add to cart

Performer EPS Intake Manifold for 1955-86 Small-Block Chevy, Black Plasma Finish

$466.95

Performer EPS Intake Manifold for 1955-86 Small-Block Chevy, Black Plasma Finish

$466.95

Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347270125
Vehicle Model	Chevrolet
Series	Performer
Grade Type	Performance
Gasket Or Seal Included	No
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
EGR Port	No
Emissions Code
Features and Benefits	• Outstanding performance for street rods, muscle cars and classics. • Low profile with provisions for stock accessory brackets. • 7 stage prewash and 4 stage coating for a beautiful and durable finish. • Easy to maintain, just wipe and go!
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Manifold ht: A-3.74″, B-4.80″; Carb pad height: 4.27″; Carb recommendations: Edelbrock AVS2 or Performer Series 500-650 cfm; Port exit dimensions: 1.15″ x 1.87″.; Recommended intake gasket: Edelbrock #7201.; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.; NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal.; DO NOT OVERTIGHTEN NPT/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT/Pipe thread is a tapered thread.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.; Will not fit under stock Corvette hood.; Even though manifolds are compatible with EGR systems, this does not mean they are legal for use on emissions controlled vehicles. Check local laws for legality.; Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.
Finish	Black Plasma
Material	Aluminum
Rear Maximum Height	4.800 in
Single Or Dual Plane Type	Dual

SKU: EPSI/EPSI
Availability:
44 in stock
Category: Manifold Intake
Tags: 1955-86 Chevy Performer EPS Intake Manifold Upgrade, Best Black Plasma Performer Intake for Classic Chevy, Black Plasma EPS Intake Manifold for Small-Block Chevy, EPS Manifold for Chevy 262-400 CID Black Plasma, Small-Block Chevy Performance Intake with Black Finish

or View Full Info

EPS Intake Manifold for Small-Block Chevy

Add to cart

Performer EPS Intake Manifold for 1955-86 Small-Block Chevy, Polished Finish

$504.95

Performer EPS Intake Manifold for 1955-86 Small-Block Chevy, Polished Finish

$504.95

More Information
Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347270118
Series	Performer
Grade Type	Performance
Gasket Or Seal Included	No
Vehicle Model	Chevrolet
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Manifold ht: A-3.74″, B-4.80″; Carb pad height: 4.27″; Carb recommendations: Edelbrock AVS2 or Performer Series 500-650 cfm.; Port exit dimensions: 1.15″ x 1.87″.; Recommended intake gasket: Edelbrock #7201.; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.; NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal.; DO NOT OVERTIGHTEN NPT/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT/Pipe thread is a tapered thread.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.; Will not fit under stock Corvette hood.; Even though manifolds are compatible with EGR systems, this does not mean they are legal for use on emissions controlled vehicles. Check local laws for legality.; Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.
Color	Polished
Finish	Polished
Material	Aluminum
Rear Maximum Height	4.800 in
Single Or Dual Plane Type	Dual

SKU: EPS/EPS/EPS
Availability:
55 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer EPS Intake Manifold w/ Oil Fill Tube for 1955-86 Small-Block Chevy

$322.95

Performer EPS Intake Manifold w/ Oil Fill Tube for 1955-86 Small-Block Chevy

$322.95

More Information
Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347027033
Series	Performer
Grade Type	Performance
Gasket Or Seal Included	No
Vehicle Model	Chevrolet
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Manifold ht: A-3.74″, B-4.80″; Carb pad height: 4.27″; Carb recommendations: Edelbrock AVS2 or Performer Series 500-650 cfm; Port exit dimensions: 1.15″ x 1.87″.; Recommended intake gasket: Edelbrock #7201.; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.; NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal.; DO NOT OVERTIGHTEN NPT/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT/Pipe thread is a tapered thread.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.; Will not fit under stock Corvette hood.; Even though manifolds are compatible with EGR systems, this does not mean they are legal for use on emissions controlled vehicles. Check local laws for legality.; Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.
Color	Satin
Finish	Satin
Material	Aluminum
Rear Maximum Height	4.800 in
Single Or Dual Plane Type	Dual

SKU: EPS/EPS
Availability:
10 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer EPS Intake Manifold w/Oil Fill Tube; Small-Block Chevy, Black Plasma

$447.95

Add to cart

Performer EPS Intake Manifold w/Oil Fill Tube; Small-Block Chevy, Chrome Plasma

$414.95

Performer EPS Intake Manifold w/Oil Fill Tube; Small-Block Chevy, Chrome Plasma

$414.95

More Information
Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347897391
Vehicle Model	Chevrolet
Series	Performer
Grade Type	Performance
Gasket Or Seal Included	No
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
EGR Port	No
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Manifold ht: A-3.74″, B-4.80″; Carb pad height: 4.27″; Carb recommendations: Edelbrock AVS2 or Performer Series 500-650 cfm; Port exit dimensions: 1.15″ x 1.87″.; Recommended intake gasket: Edelbrock #7201.; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.; NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal. NPT/Pipe thread is a tapered thread. Edelbrock #8504 intake manifold bolt kit which includes hardened washers to ensure proper torque and prevent galling of the aluminum is highly recommended. Will not fit under stock Corvette hood.
Finish	Chrome Plasma
Material	Aluminum
Rear Maximum Height	4.800 in
Single Or Dual Plane Type	Dual

SKU: Chev/Chev/Chev/1
Availability:
18 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer EPS Manifold w/Oil Fill Tube for Small-Block Chevy, Black Finish

$445.95

Performer EPS Manifold w/Oil Fill Tube for Small-Block Chevy, Black Finish

$445.95

More Information
Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347270330
Series	Performer
Grade Type	Performance
Gasket Or Seal Included	No
Vehicle Model	Chevrolet
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Manifold ht: A-3.74″, B-4.80″; Carb pad height: 4.27″; Carb recommendations: Edelbrock AVS2 or Performer Series 500-650 cfm.; Port exit dimensions: 1.15″ x 1.87″.; Recommended intake gasket: Edelbrock #7201.; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.; NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal.; DO NOT OVERTIGHTEN NPT/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT/Pipe thread is a tapered thread.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.; Will not fit under stock Corvette hood.; Even though manifolds are compatible with EGR systems, this does not mean they are legal for use on emissions controlled vehicles. Check local laws for legality.; Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.
Color	Black Powder Coated
Finish	Black Powder Coated
Material	Aluminum
Rear Maximum Height	4.800 in
Single Or Dual Plane Type	Dual

Availability:
22 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer Ford 400 EGR Intake Manifold

$526.95

Performer Ford 400 EGR Intake Manifold

$526.95

Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347037711
Series	Performer
Gasket Or Seal Included	No
Vehicle Model	Ford
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Intake gasket: Fel-Pro #MS96020; For non-EGR, off-road applications, use #8714 4V spacer; Replacement EGR plate gaskets: Edelbrock #3896 & #3897; Manifold height: A-3.60″, B-4.75″ (without EGR plates installed); Carb pad height: 4.17″; Carb recommendations: 2V OEM 2-Bbl off highway, Non EGR. 4V: Edelbrock AVS2 or Performer Series 600-650 cfm. For automatic transmissions use #1483 and #1493 or #1844; Port exit dimensions: 1.16″ x 1.66″; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Finish	Satin
Material	Aluminum
Rear Maximum Height	4.750 in
Single Or Dual Plane Type	Dual

SKU: Per/Per/Per/1
Availability:
25 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer Intake Manifold for 1955-86 Small-Block Chevy, Satin Finish

$257.95

Performer Intake Manifold for 1955-86 Small-Block Chevy, Satin Finish

$257.95

More Information
Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347021017
Series	Performer
Grade Type	Performance
Gasket Or Seal Included	No
Vehicle Model	Chevrolet
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Manifold height: A-3.50″, B-4.60″; Carb pad height: 4.05″; Carb recommendations: OEM 4-Bbl, Use choke rod #9171. Edelbrock AVS2 Series or Performer Series Carb 500-650cfm. Bracket #8031 or #8036 for 1972-1978.; Port exit dimensions: 1.14″ x 1.88″; Recommended intake gasket: Edelbrock #7201.; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.; NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal.; DO NOT OVERTIGHTEN NPT/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT/Pipe thread is a tapered thread.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.; Choke plate #8901 included; Even though manifolds are compatible with EGR systems, this does not mean they are legal for use on emissions controlled vehicles. Check local laws for legality.; Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.
Color	Satin
Finish	Satin
Material	Aluminum
Rear Maximum Height	4.600 in
Single Or Dual Plane Type	Dual

SKU: Int/Int/1
Availability:
23 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer Intake Manifold for 1965-79 Pontiac 326-455 Non-EGR

$409.95

Performer Intake Manifold for 1965-79 Pontiac 326-455 Non-EGR

$409.95

Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347021567
Series	Performer
Grade Type	Performance
Gasket Or Seal Included	No
Vehicle Model	Pontiac
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gasket: Edelbrock #7280.; For 1968-71 use our #8015 throttle bracket.; Manifold height: A-5.50″, B-6.60″ measured to engine block same as stock 4-bbl. intake; Carb pad height: 6.05″; Port exit dimensions: 1.06″ x 1.92″; For Trans Am use OEM 4-bbl. carb for Shaker Hood clearance.; Choke Plate included; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Color	Satin
Finish	Satin
Material	Aluminum
Rear Maximum Height	6.600 in
Single Or Dual Plane Type	Dual

SKU: htt/htt
Availability:
44 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer Intake Manifold for 1965-79 Pontiac 326-455 Non-EGR, Black Finish

$545.95

Performer Intake Manifold for 1965-79 Pontiac 326-455 Non-EGR, Black Finish

$545.95

More Information
Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347215638
Series	Performer
Grade Type	Performance
Gasket Or Seal Included	No
Vehicle Model	Pontiac
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gasket: Edelbrock #7280.; For 1968-71 use Edelbrock #8015 throttle bracket.; Manifold height: A-5.50″, B-6.60″ measured to engine block same as stock 4-bbl. intake; Carb pad height: 6.05″; Carb recommendations: OEM 4-Bbl, Edelbrock AVS2 or Performer Series 600-800 cfm.; Port exit dimensions: 1.06″ x 1.92″; For Trans Am use OEM 4-bbl. carb for Shaker Hood clearance.; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Color	Black Powder Coated
Finish	Black Powder Coated
Material	Aluminum
Rear Maximum Height	6.600 in
Single Or Dual Plane Type	Dual

SKU: Ed/Ed/Ed/1
Availability:
17 in stock
Category: Manifold Intake

or View Full Info

Edelbrock Performer Pontiac Intake Manifold

Add to cart

Performer Intake Manifold for 1965-79 Pontiac 326-455 Non-EGR, Polished Finish

$618.95

Performer Intake Manifold for 1965-79 Pontiac 326-455 Non-EGR, Polished Finish

$618.95

Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347215614
Series	Performer
Grade Type	Performance
Gasket Or Seal Included	No
Vehicle Model	Pontiac
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gasket: Edelbrock #7280.; For 1968-71 use Edelbrock #8015 throttle bracket.; Manifold height: A-5.50″, B-6.60″ measured to engine block same as stock 4-bbl. intake; Carb pad height: 6.05″; Carb recommendations: OEM 4-Bbl, Edelbrock AVS2 or Performer Series 600-800 cfm.; Port exit dimensions: 1.06″ x 1.92″; For Trans Am use OEM 4-bbl. carb for Shaker Hood clearance.; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Color	Polished
Finish	Polished
Material	Aluminum
Rear Maximum Height	6.600 in
Single Or Dual Plane Type	Dual

SKU: Ed/Ed/Ed/2
Availability:
20 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer Intake Manifold for 1968-1976 Cadillac 472-500, Satin Finish

$426.95

Performer Intake Manifold for 1968-1976 Cadillac 472-500, Satin Finish

$426.95

Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347021154
Series	Performer
Gasket Or Seal Included	No
Vehicle Model	Cadillac
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gasket: Fel-Pro #MS96028; When using Quadrajet, #2115 accepts divorced or electric choke only.; Manifold height: A-4.88″, B-5.81″; Carb pad height: 5.34″; Carb recommendations: OEM 4-Bbl, Edelbrock AVS2 Series or Performer Series 750-800cfm; Port exit dimensions: 1.25″ x 2.00″; The carb pad is 3″ taller than stock, and will not fit many stock applications.; Due to the design and leg configuration of the Edelbrock manifold, the stock air conditioning compressor and bracket will not fit. The mounting bosses are cast into the manifold only to facilitate fabrication of bracketry, if desired.; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Finish	Satin
Material	Aluminum
Rear Maximum Height	5.810 in
Single Or Dual Plane Type	Dual

SKU: Int/Int/Int/4
Availability:
22 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer Intake Manifold for 1970-91 AMC, Non-EGR, Satin Finish

$424.95

Performer Intake Manifold for 1970-91 AMC, Non-EGR, Satin Finish

$424.95

More Information
Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347021314
Series	Performer
Gasket Or Seal Included	No
Vehicle Model	AMC/Jeep
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gasket: Edelbrock #7213 Fel-Pro MS96011; Must use factory style metal valley tray; Manifold height: A-4.20″, B-5.50″; Carb pad height: 4.85″; Requires #8008 or #8024 Stud, nut and washer kit.; Car recommendations: OEM 4-Bbl . Non-EGR square-bore Edelbrock AVS2 or Performer Series 500-650cfm.; Port exit dimensions: 1.03″ x 2.07″; #2131 must use factory style metal valley tray.; Manifolds have two center bolt holes offset.; Edelbrock bracket #8034 required for 1979 and later vehicles.; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.; Manifold will not accept factory Motorcraft spread-bore carburetors.
Finish	Satin
Material	Aluminum
Rear Maximum Height	5.500 in
Single Or Dual Plane Type	Dual

SKU: Int/Int
Availability:
18 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer Intake Manifold for 1985-95 GM 90 Deg V6 (3.8L & 4.3L)

$358.95

Performer Intake Manifold for 1985-95 GM 90 Deg V6 (3.8L & 4.3L)

$358.95

More Information
Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347021116
Series	Performer
Gasket Or Seal Included	No
Vehicle Model	Chevrolet
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gasket: Edelbrock #7209 or Fel-Pro #1202; Manifold height: A-3.50″, B-4.18″; Carb pad height: 3.84″; Carb recommendations: Edelbrock AVS2 Series or Performer Series 500cfm; Port exit dimensions: 1.15″ x 1.87″; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Finish	Satin
Material	Aluminum
Rear Maximum Height	4.180 in
Single Or Dual Plane Type	Dual

SKU: 198/198
Availability:
18 in stock
Category: Manifold Intake

or View Full Info

Performer Intake Manifold in Satin Finish

Add to cart

Performer Intake Manifold for 1987-95 Small Block Chevy, Satin Finish

$329.95

Performer Intake Manifold for 1987-95 Small Block Chevy, Satin Finish

$329.95

Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347021048
Series	Performer
Grade Type	Performance
Gasket Or Seal Included	No
Vehicle Model	Chevrolet
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Manifold ht: A-3.50″, B-4.60″; Carb pad height: 4.05″; Carb recommendations: OEM 4-Bbl, Use choke rod #9171. Edelbrock AVS2 Series or Performer Series Carb 500-650cfm. Bracket #8031 or #8036 for 1972-1978.; Port exit dimensions: 1.14″ x 1.88″; Recommended intake gasket: GM #10159409; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.; NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal.; DO NOT OVERTIGHTEN NPT/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT/Pipe thread is a tapered thread.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.; Choke plate #8901 included; Even though manifolds are compatible with EGR systems, this does not mean they are legal for use on emissions controlled vehicles. Check local laws for legality.; Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.
Color	Satin
Finish	Satin
Material	Aluminum
Rear Maximum Height	4.600 in
Single Or Dual Plane Type	Dual

SKU: Per/Per/6
Availability:
19 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer Intake Manifold for Buick 400-455 V8, Non-EGR, Satin Finish

$440.95

Performer Intake Manifold for Buick 400-455 V8, Non-EGR, Satin Finish

$440.95

More Information
Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347021468
Series	Performer
Gasket Or Seal Included	No
Vehicle Model	Buick
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gaskets: for 1967-71, Fel-Pro #MS96005; 1972-76, Fel-Pro #MS96014; Manifold height: A-3.80″, B-4.75″; Carb pad height: 4.27″; Carb recommendations: OEM 4-Bbl, Edelbrock AVS2 or Performer Series 650-800cfm; Port exit dimensions: 1.14″ x 2.26″; #2146 accepts divorced choke-type Quadrajet only.; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Finish	Satin
Material	Aluminum
Rear Maximum Height	4.750 in
Single Or Dual Plane Type	Dual

SKU: TBI/TBI
Availability:
16 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer Intake Manifold for GM 90 Deg V6 (3.8L & 4.3L), Vortec

$402.95

Performer Intake Manifold for GM 90 Deg V6 (3.8L & 4.3L), Vortec

$402.95

Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347021147
Series	Performer
Gasket Or Seal Included	No
Vehicle Model	Chevrolet
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gasket: GM 89017866; Manifold height: A-3.50″, B-4.18″; Carb pad height: 3.84″; Carb recommendations: Edelbrock AVS2 Series or Performer Series 500cfm; Port exit dimensions: port exit is 2.05″ tall with slanted side walls; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Finish	Satin
Material	Aluminum
Rear Maximum Height	4.180 in
Single Or Dual Plane Type	Dual

SKU: Int/Int/Int/6
Availability:
20 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer Intake Manifold for Olds 400-455, Non-EGR, Satin

$494.95

Performer Intake Manifold for Olds 400-455, Non-EGR, Satin

$494.95

Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347021512
Series	Performer
Gasket Or Seal Included	No
Vehicle Model	Oldsmobile
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	For correct gasket kit when using #2151 in a marine/ competition application, contact Mondello Performance at (805) 237-8808.; Manifold height: A-4.40″, B-5.50″; Carb pad height: 4.95″; Carb recommendations: Edelbrock AVS2 or Performer Series 750-800cfm; Port exit dimensions: 1.22″ x 2.22″; Manifold has no provision for OEM choke operation.; Will not fit Toronado or 4-4-2 Ram-Air scoop without hood modification or 1964-67 Cutlass; HEI will clear; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Finish	Satin
Material	Aluminum
Rear Maximum Height	5.500 in
Single Or Dual Plane Type	Dual

SKU: Int/Int/Int/3
Availability:
35 in stock
Category: Manifold Intake

or View Full Info

Performer Intake Manifold for Vortec Heads

Add to cart

Performer Intake Manifold for Small-Block Chevy w/Vortec Heads

$322.95

Performer Intake Manifold for Small-Block Chevy w/Vortec Heads

$322.95

Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347021161
Series	Performer
Gasket Or Seal Included	No
Vehicle Model	Chevrolet
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gasket: Edelbrock #7235; Manifold ht: A-3.87″, B-5.28″; Carb pad height: 4.57″; Carb recommendations: OEM 4-Bbl (pre-1981, Electric choke ONLY) Use #8032 throttle bracket. Edelbrock AVS2 Series or Performer Series 500-650cfm, use bracket #8032 for 1972-78.; Port exit dimensions: 2.05″ tall with slanted side walls; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.; NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal.; DO NOT OVERTIGHTEN NPT/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT/Pipe thread is a tapered thread.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.; Stock brackets will require modification to fit the upright manifold bolt holes.; Will not fit under stock Corvette hood.; Even though manifolds are compatible with EGR systems, this does not mean they are legal for use on emissions controlled vehicles. Check local laws for legality.; Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.
Finish	Satin
Material	Aluminum
Rear Maximum Height	5.280 in
Single Or Dual Plane Type	Dual

SKU: Per/Per/Per/5
Availability:
22 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer Intake Manifold Small-Block Chevy

$381.95

Performer Intake Manifold Small-Block Chevy

$381.95

More Information
Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347037063
Series	Performer
Gasket Or Seal Included	No
Vehicle Model	Chevrolet
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Manifold ht: A-3.50″, B-4.60″; Carb pad height: 4.05″; Carb recommendations: OEM 4-Bbl, Edelbrock Performer Series #1400, 600 cfm.; Port exit dimensions: 1.14″ x 1.88″; Recommended intake gasket: GM #10163409; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.; NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal.; DO NOT OVERTIGHTEN NPT/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT/Pipe thread is a tapered thread.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.; Choke plate #8901 included; See adapter #8035 for clamp-on EGR valve.; With carb #1400 & #3701, EGR spacer #1476 is required.; The #3706 has no provision for exhaust heated chokes.; Even though manifolds are compatible with EGR systems, this does not mean they are legal for use on emissions controlled vehicles. Check local laws for legality.; Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.
Finish	Satin
Material	Aluminum
Rear Maximum Height	4.600 in
Single Or Dual Plane Type	Dual

DOWNLO

SKU: Sma/Sma/3
Availability:
12 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer Intake Manifold Small-Block Chrysler

$449.95

Performer Intake Manifold Small-Block Chrysler

$449.95

Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347037766
Series	Performer
Gasket Or Seal Included	No
Vehicle Model	Chrysler
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gasket: Edelbrock #7276 Chrysler #4494462AB for 318, #4397642 for 340 and 360 (or equivalent); Manifold height: A-4.13″, B-5.13″; Carb pad height: 4.63″; Carb recommendations: OEM 4-Bbl, Edelbrock AVS2 or Performer Series 600-650 cfm. Use #1481 or #1483 throttle/transmission lever kit.; Port exit dimensions: .97″ x 1.95″; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Finish	Satin
Material	Aluminum
Rear Maximum Height	5.130 in
Single Or Dual Plane Type	Dua

SKU: Int/Int/Int/7
Availability:
15 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer Intake Manifold Small-Block Ford

$394.95

Performer Intake Manifold Small-Block Ford

$394.95

Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347037216
Series	Performer
Gasket Or Seal Included	No
Vehicle Model	Ford
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gasket: Edelbrock #7220; Carb recommendations: OEM 4-Bbl. Use #8011 if necessary, for automatic transmissions use #1483, #1490 or #1844.; Includes gaskets and 4-Bbl plate #8017 for sealing of OEM EGR plate and carburetor.; Manifold height: A-3.13″, B-4.31″ without EGR plates installed; Carb pad height: 3.72″; Port exit dimensions: .90″ x 1.90″; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Finish	Satin
Material	Aluminum
Rear Maximum Height	4.310 in
Single Or Dual Plane Type	Dual

SKU: Per/Per
Availability:
55 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer Olds 350 Intake Manifold for 307-330-350-403 Small-Block Oldsmobile

$473.95

Performer Olds 350 Intake Manifold for 307-330-350-403 Small-Block Oldsmobile

$473.95

Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347027118
Series	Performer
Grade Type	Performance
Gasket Or Seal Included	No
Vehicle Model	Oldsmobile
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gasket: Fel-Pro #MS96027; For 403 Pontiac Trans Am, use OEM 4-bbl. only (for shaker hood clearance); HEI will clear this manifold; Manifold height: A-2.50″, B-3.90″; Carb pad height: 3.20″; Carb recommendations: Edelbrock AVS2 or Performer Series 500-650 cfm; Port exit dimensions: 1.18″ x 1.86″; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Color	Satin
Finish	Satin
Material	Aluminum
Rear Maximum Height	4.800 in
Single Or Dual Plane Type	Dual

Availability: N/A
Category: Manifold Intake

or View Full Info

Add to cart

Performer Small-Block Chevy 2.8L Intake Manifold

$360.95

Performer Small-Block Chevy 2.8L Intake Manifold

$360.95

More Information
Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347037858
Series	Performer
Gasket Or Seal Included	No
Vehicle Model	Chevrolet
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-6000 RPM
Emissions Code	N/A
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gasket: Fel-Pro #1270 or #MS91022.; Linkage and bracketry come with top.; Jeep Cherokee, additional hood shimming is required for clearance (when used with #3787 Top) Hood shims available from Jeep dealers (part #J0680435); Port exit dimensions: 1.00″ x 1.28″/1.00″ x 1.71″.; Manifold height: A-4.90″, B-5.95″; Carb pad height: 5.42″ (when used with #3789 Top); Manifold height: A-4.37″, B-5.45″; Carb pad height: 4.91″ (when used with #3787 Top); Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Finish	Satin
Material	Aluminum
Rear Maximum Height	0.010 in
Single Or Dual Plane Type	Dual

SKU: Sma/Sma/Sma
Availability:
23 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer Small-Block Chevy 4.3L T.B.I. V6 Intake Manifold

$566.95

Performer Small-Block Chevy 4.3L T.B.I. V6 Intake Manifold

$566.95

More Information
Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347037131
Series	Performer
Gasket Or Seal Included	No
Vehicle Model	Chevrolet
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Use stock Throttle Body Injection unit.; Recommended intake gasket: GM #12510908; Manifold height: A-3.93″, B-5.15″; Carb pad height: 4.54″; Port exit dimensions: 1.10″ x 1.92″; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Finish	Satin
Material	Aluminum
Rear Maximum Height	5.150 in
Single Or Dual Plane Type	Dual

SKU: Sma/Sma
Availability:
25 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer Small-Block Oldsmobile 350 EGR Intake Manifold

$463.95

Performer Small-Block Oldsmobile 350 EGR Intake Manifold

$463.95

Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347037117
Series	Performer
Gasket Or Seal Included	No
Vehicle Model	Oldsmobile
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Carb recommendations: OEM 4-Bbl; Edelbrock Performer Series, Thunder Series AVS, AVS2 and Carter AFB carburetors will not fit #3711.; Recommended intake gasket: Fel-Pro #MS96027; For 403 Pontiac Trans Am, use OEM 4-bbl. only (for shaker hood clearance); EGR block-off plate included; Use choke block-off plate #8951 (included); Factory cruise control will not clear EGR valve without linkage alteration.; HEI will clear this manifold; Manifold height: A-2.50″, B-3.90″; Carb pad height: 3.20″; Port exit dimensions: 1.18″ x 1.86″; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Finish	Satin
Material	Aluminum
Rear Maximum Height	3.900 in
Single Or Dual Plane Type	Dual

SKU: Sma/Sma/1
Availability:
13 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer T.B.I. Intake Manifold Small-Block Chevy

$494.95

Performer T.B.I. Intake Manifold Small-Block Chevy

$494.95

Performer T.B.I. Intake Manifold Small-Block Chevy

More Information
Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347037049
Series	Performer
Gasket Or Seal Included	No
Vehicle Model	Chevrolet
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Use stock Throttle Body Injection unit.; Recommended intake gasket: GM #10159409.; Manifold height: A-3.70″, B-5.10″; TBI pad height: 4.40″, .250″ taller than stock.; Port exit dimensions: 1.13″ x 1.87″.; Made in the USA; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.; Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.; Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.; NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal.; DO NOT OVERTIGHTEN NPT/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT/Pipe thread is a tapered thread.; Even though manifolds are compatible with EGR systems, this does not mean they are legal for use on emissions controlled vehicles. Check local laws for legality.; Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.
Finish	Satin
Material	Aluminum
Rear Maximum Height	5.100 in
Single Or Dual Plane Type	Dual

SKU: Per/Per/7
Availability:
32 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer Top Small-Block Chevy 4V Intake Manifold

$205.95

Performer Top Small-Block Chevy 4V Intake Manifold

$205.95

More Information
Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347037896
Series	Performer
Grade Type	Performance
Gasket Or Seal Included	No
Vehicle Model	Chevrolet
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-6000 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gasket: Fel-Pro #1270 or #MS91022.; Carb recommendations: Holley #0-8007 (390 cfm); Linkage and bracketry come with top.; Port exit dimensions: 1.00″ x 1.28″/1.00″ x 1.71″.; Manifold height: A-4.90″, B-5.95″; Carb pad height: 5.42″; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Color	Satin
Finish	Satin
Material	Aluminum
Rear Maximum Height	0.010 in
Single Or Dual Plane Type	Dual

SKU: Top/Top/Top
Availability:
19 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer Truck 5.0L Intake Manifold Small-Block Ford

$9,086.95

Performer Truck 5.0L Intake Manifold Small-Block Ford

$9,086.95

More Information
Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347038411
Series	Performer
Gasket Or Seal Included	No
Vehicle Model	Ford
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	Recommended intake gasket: Edelbrock #7220; Port exit dimensions: 1.02″ x 1.85″; Overall height: 13.25″; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Finish	Satin
Material	Aluminum
Rear Maximum Height	13.250 in
Single Or Dual Plane Type	Single

SKU: Per/Per/Per
Availability:
12 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Performer Truck 5.8L Intake Manifold Small-Block Ford

$1,078.95

Performer Truck 5.8L Intake Manifold Small-Block Ford

$1,078.95

Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347038817
Series	Performer
Grade Type	Performance
Gasket Or Seal Included	No
Vehicle Model	Ford
Availability Note	Available to Order
Warranty	12 Months
RPM Range	Idle-5500 RPM
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	For Trucks under 8600 GVW; Recommended intake gasket: Edelbrock #7220; Port exit dimensions: 1.04″ x 1.85″; Overall height: 13.25″; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Color	Satin
Finish	Satin
Material	Aluminum
Rear Maximum Height	13.250 in
Single Or Dual Plane Type	Dual

SKU: Int/Int/Int/2
Availability:
19 in stock
Category: Manifold Intake

or View Full Info

Add to cart

Pro-Flo 4 EFI Traditional 4150-Style Kit #35680 For BB Ford 429-460

$1,864.95

Pro-Flo 4 EFI Traditional 4150-Style Kit #35680 For BB Ford 429-460

$1,864.95

Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347356805
System Type	Traditional 4150-Style Kit
Gasket Or Seal Included	Yes
Quantity	Kit
Wiring Harness Included	Yes
Idle Air Control Motor Included	Yes
Fuel Pressure Port	1/8-27 NPT
Idle Air Control Motor Included	Yes
Bore Diameter	1.75
Fuel Injector Type	42 lb/hr
Maximum Horsepower	675
Availability Note	Available to Order
Warranty	24 Months
Distributor Cap Included	Yes
Manifold Color	Satin Finish
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	This Pro-Flo 4 system for the Ford 429/460 requires a high-pressure, EFI-compatible fuel delivery system. Edelbrock fuel delivery kits are available and sold separately for this application. Visit edelbrock.com to choose the right kit for your installation. Manifolds height for Pro-Flo 4 #35680 is 4.25 inches.
Finish	Satin
Throttle Body Type	4 Barrel

SKU: 4150 Style
Availability:
17 in stock
Categories: Valve Covers, Engine Parts, Manifold Intake

or View Full Info

Add to cart

Pro-Flo 4 EFI Traditional 4150-Style Kit #35770 1986 & Earlier Chevy Small-Block

$1,989.95

Pro-Flo 4 EFI Traditional 4150-Style Kit #35770 1986 & Earlier Chevy Small-Block

$1,989.95

Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347357703
System Type	Traditional 4150-Style Kit
Gasket Or Seal Included	Yes
Quantity	Kit
Wiring Harness Included	Yes
Idle Air Control Motor Included	Yes
Fuel Pressure Port	1/8-27 NPT
Idle Air Control Motor Included	Yes
Bore Diameter	1.75
Fuel Injector Type	35 lb/hr
Maximum Horsepower	550
Availability Note	Available to Order
Warranty	24 Months
Distributor Cap Included	Yes
Emissions Code
Hazardous Materials Warning	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	This kit will require a high pressure EFI fuel delivery system. Fuel delivery systems are available and sold separately. 35770 manifold height: 4.58″. Throttle body height: 2.530″
Finish	Satin
Throttle Body Type	4 Barrel

SKU: 4E/4E/4E/4E
Availability:
13 in stock
Categories: Valve Covers, Engine Parts, Manifold Intake

or View Full Info

Performer EPS Intake Manifold for 1955-86 Small-Block Chevy, Black Plasma Finish

Performer EPS Intake Manifold for 1955-86 Small-Block Chevy, Polished Finish

Performer EPS Intake Manifold w/ Oil Fill Tube for 1955-86 Small-Block Chevy

Performer EPS Intake Manifold w/Oil Fill Tube; Small-Block Chevy, Black Plasma

Performer EPS Intake Manifold w/Oil Fill Tube; Small-Block Chevy, Chrome Plasma

Performer EPS Manifold w/Oil Fill Tube for Small-Block Chevy, Black Finish

Performer Ford 400 EGR Intake Manifold

Performer Intake Manifold for 1955-86 Small-Block Chevy, Satin Finish

Performer Intake Manifold for 1965-79 Pontiac 326-455 Non-EGR

Performer Intake Manifold for 1965-79 Pontiac 326-455 Non-EGR, Black Finish

Performer Intake Manifold for 1965-79 Pontiac 326-455 Non-EGR, Polished Finish

Performer Intake Manifold for 1968-1976 Cadillac 472-500, Satin Finish

Performer Intake Manifold for 1970-91 AMC, Non-EGR, Satin Finish

Performer Intake Manifold for 1985-95 GM 90 Deg V6 (3.8L & 4.3L)

Performer Intake Manifold for 1987-95 Small Block Chevy, Satin Finish

Performer Intake Manifold for Buick 400-455 V8, Non-EGR, Satin Finish

Performer Intake Manifold for GM 90 Deg V6 (3.8L & 4.3L), Vortec

Performer Intake Manifold for Olds 400-455, Non-EGR, Satin

Performer Intake Manifold for Small-Block Chevy w/Vortec Heads

Performer Intake Manifold Small-Block Chevy

Performer Intake Manifold Small-Block Chrysler

Performer Intake Manifold Small-Block Ford

Performer Olds 350 Intake Manifold for 307-330-350-403 Small-Block Oldsmobile

Performer Small-Block Chevy 2.8L Intake Manifold

Performer Small-Block Chevy 4.3L T.B.I. V6 Intake Manifold

Performer Small-Block Oldsmobile 350 EGR Intake Manifold

Performer T.B.I. Intake Manifold Small-Block Chevy

Performer Top Small-Block Chevy 4V Intake Manifold

Performer Truck 5.0L Intake Manifold Small-Block Ford

Performer Truck 5.8L Intake Manifold Small-Block Ford

Pro-Flo 4 EFI Traditional 4150-Style Kit #35680 For BB Ford 429-460

Pro-Flo 4 EFI Traditional 4150-Style Kit #35770 1986 & Earlier Chevy Small-Block

Contact Information

Contact Information