P-Ayr 3020 Plastic Foam SBF Ford 302 Mock Up Engine Block

These lightweight setup blocks are made of closed-cell polyurethane molded directly from original castings. These mock up motor blocks are great for mocking up engine mounts in a chassis, and you can even bolt up all of your accessories to check for fit and clearance.

Just a few of the features include:

• Threaded steel inserts in key bolt locations (spark plugs, engine and accessory mounts, ect.)
• Accepts original front and rear main caps
• Accepts original oil filter
• Easily painted

Powermaster 19103 PowerMAX Starter, Hitachi, Chrome, Ford

Small block Chevy low profile daul quad intake top from Offenhauser. Made out of aluminum. Designed for 327-400.

Chevy Small Block V8, Carbureted Fuel System Type

• Designed for 327-400 Chevy small block V8’s
• Aluminum construction
• Natural finish
• 4-barrel square bore carburetor flange type
• 5.160″ x 5.625″ bolt pattern

OTB Finned Remote Mount Reservoir Polished

FEATURES:

Universal Application
Machined 1/8″ NPT
4 1/4″ wide X 3 1/4″ tall X 2 1/4″ deep

Dual chamber remote mount brake fluid reservoir made to the highest standards. A-356 aluminum casting, precision machined, and highly polished. Designed to accept fluid lines from the back or bottom side as pictured and mounts flush to a flat surface with 4 machined blind hole threads on the back side. Made in USA

WHAT’S INCLUDED:

NOTES & TIPS:

If using the common Corvette style master cylinder you can replace the top with OTB-6437 or OTB-6438 to work with this remote reservoir.

Remember to always use Anti-Seize on all stainless steel and aluminum parts

owermaster 3124 Starter, Ford 2-bolt, Natural

Key Specs

owermaster 3124 Starter, Ford 2-bolt, Natural

Key Specs

PerTronix D131701 Flame-Thrower Ford 351W Billet Distributor

Key Specs

Powermaster 9103 PowerMax Starter, Small Block Ford, 157 Tooth

This lightweight high-torque gear reduction starter clears all headers and oil pans where original equipment starters won’t. The PowerMax starter is a great choice for the everyday driver that has stock compression and timing.

Starter works with most oversized kickout oil pans. Features 160 ft. lbs. of torque and a 6.1:1 gear reduction ratio. Fits Small Block Ford applications w/ 157T manual transmissions and 157/164T automatic transmission .

• 157 Tooth Flywheel & 157/164 Tooth Flexplate Application
• 4.08″ Starter Registry Hole
• Adjustable mounting block
• Works with most Oversized Kickout Oil Pans
• 6.1:1 Gear Reduction Ratio
• 160 ft. lbs. of torque.
• Recommended for 10:1 compression ratio
• Weighs 7.44 pounds
• Mounting Bolts Included
• Dyno Test Results included

Pushrod Set for Chevy 348/409 “W”

Manufacturer	Edelbrock
Application	Application Specific
UPC	00085347096350
Quantity	Set of 16
Top Tip Diameter	0.375 in
Top Tip Type	Ball
Bottom Tip Diameter	0.375 in
Bottom Tip Type	Ball
Availability Note	Available to Order
Warranty	12 Months
Wall Thickness	0.080 in
Emissions Code	N/A
Hazardous Materials Warning	WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes	For Chevy 348/409 “W”; Sold in sets of 16.
Finish	Black Oxide
Length	(8-Intake) 8.650 in, (8-Exhaust) 9.000 in
Material	Chromoly

Quick Fuel 30-302QFT Mechanical Fuel Pump, 110 GPH, Ford 289-351W

SBC 4-71 Blower Intake Manifold Un-polished

FEATURES: SBC 4-71 Blower Intake Manifold

SBC 4-71 Blower Intake Manifold. Sometimes a 6-71 is just a bit to much for a hot rod. Get the Blower look and feel for your SBC with this hard to find 4-71 intake manifold. Carefully designed and beautifully cast for good performance and aesthetics. Full polished assemblies are not currently available on our website, but call for current pricing and availability.

WHAT’S INCLUDED:

NOTES & TIPS:

Bolts and gaskets not included.

Some aftermarket distributors may require enlarging the hole opening to seat correctly. Contact for further details.

Remember to always use Anti-Seize on all stainless steel and aluminum parts

Small Block Chevy Oil Pan Gasket, 1975-1985 One-Piece

Chevy Small Block V8, Driver Side Dipstick Location

• Left hand side (’57-’79) and right hand side (’80-’85)dipstick
• For 2 piece rear main seal blocks
• Rubber gasket with steel bushings
• 75-’85 w/thick front seal

Application

Stromberg E-Fire Distributor 2 Bolt 1942-48 12 V Neg For Sale

FEATURES:

The E-Fire electronic distributor is a must have. High performance with a stock feel and look. Features original type timing adjuster screw on side and a cap that looks original. Made as short as possible to fit most any application. The 21A-12 model suits 1942 – 1948 Ford and has 12V negative ground. Advance rate is tuned specifically for Flathead V-8s.

WHAT’S INCLUDED:

NOTES & TIPS:

Must be used with standard points style coil only. Do NOT use HEI type coils. Stromberg recommends 1.5 ohm coils for best results. 1.5 Ohm coils are also available on this store.