Pro-Flo 4 EFI Traditional 4150-Style Kit #35680 For BB Ford 429-460
Pro-Flo 4 EFI Traditional 4150-Style Kit #35680 For BB Ford 429-460

Pro-Flo 4 EFI Traditional 4150-Style Kit #35680 For BB Ford 429-460

$1,864.95
Manufacturer Edelbrock
Application Application Specific
UPC 00085347356805
System Type Traditional 4150-Style Kit
Gasket Or Seal Included Yes
Quantity Kit
Wiring Harness Included Yes
Idle Air Control Motor Included Yes
Fuel Pressure Port 1/8-27 NPT
Idle Air Control Motor Included Yes
Bore Diameter 1.75
Fuel Injector Type 42 lb/hr
Maximum Horsepower 675
Availability Note Available to Order
Warranty 24 Months
Distributor Cap Included Yes
Manifold Color Satin Finish
Emissions Code

 
Hazardous Materials Warning WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes
  • This Pro-Flo 4 system for the Ford 429/460 requires a high-pressure, EFI-compatible fuel delivery system. Edelbrock fuel delivery kits are available and sold separately for this application. Visit edelbrock.com to choose the right kit for your installation. Manifolds height for Pro-Flo 4 #35680 is 4.25 inches.
Finish Satin
Throttle Body Type 4 Barrel

Pro-Flo 4 EFI Traditional 4150-Style Kit #35680 For BB Ford 429-460

The Edelbrock Pro-Flo 4 EFI Kit #35680 for Ford big-block 429-460 engines is a fully sequential multi-port injection system designed with a fuel injector strategically positioned in each runner of the intake manifold to deliver the best fuel atomization and most even distribution to each cylinder.
This system features the high-performance Super Victor single-plane intake manifold that comes preassembled with high-flow injectors, fuel rails and 4150-flange throttle body. All supporting sensors, wire harnesses and ECU are included along with a full-color installation manual.
The Torker II EFI manifold is designed with a larger cross-sectional area in the plenum with longer runners for high-horsepower and/or large cubic-inch applications. This kit uses 42 Lb/Hr injectors and is rated for 675 horsepower at 58 PSI of fuel pressure.
The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet. Pro-Flo 4 EFI Traditional 4150-Style Kit

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.