Intake Manifold for 1965-79 Pontiac
Intake Manifold for 1965-79 Pontiac

Performer Intake Manifold for 1965-79 Pontiac 326-455 Non-EGR

$409.95
Manufacturer Edelbrock
Application Application Specific
UPC 00085347021567
Series Performer
Grade Type Performance
Gasket Or Seal Included No
Vehicle Model Pontiac
Availability Note Available to Order
Warranty 12 Months
RPM Range Idle-5500 RPM
Emissions Code

 
Hazardous Materials Warning WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Installation Notes
  • Recommended intake gasket: Edelbrock #7280.; For 1968-71 use our #8015 throttle bracket.; Manifold height: A-5.50″, B-6.60″ measured to engine block same as stock 4-bbl. intake; Carb pad height: 6.05″; Port exit dimensions: 1.06″ x 1.92″; For Trans Am use OEM 4-bbl. carb for Shaker Hood clearance.; Choke Plate included; Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.; Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Color Satin
Finish Satin
Material Aluminum
Rear Maximum Height 6.600 in
Single Or Dual Plane Type Dual

Intake Manifold for 1965-79 Pontiac

Performer Intake Manifold for 1965-79 Pontiac 326-455 Non-EGR. Edelbrock part #2156 Performer Pontiac intake manifold is designed for 1965-79 Pontiac 326-455 c.i.d. V8’s (except Ram Air V and 265/301 V8’s). Edelbrock’s Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm.

Buy Intake Manifold for 1965-79 Pontiac online 

This Performer intake manifold is ideal for passenger cars, trucks, 4x4s, tow vehicles and RVs.

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.